+971 6 533 1353

MagicTrans Jet Light Transfer Papers

Request Quote Now

Enter Quantity for MagicTrans Jet Light Transfer Papers

Code Image Product Name Available Quantity in Stock Enter Quantity Reserved Stock Net Available
350 A4 - MagicTrans-Jet Light A4 MagicTrans-Jet Light Papers 33858 101 33757
349 A3 - MagicTrans-Jet Light A3 MagicTrans-Jet Light Papers On Demand 0 0
350-P Premium A4 MagicTrans-Jet Light Papers On Demand 0 0
Note: Quantities are subject to change and are not final. Note that we receive new shipments on regular basis or many times can be manufactured based on the order. If you require bigger quantity, please contact us for delivery time. The weight and size of the products are just an estimate and may be different than the actual weight or size. The exact shipment weight or dimension will be calculated once the order is confirmed.

 

Packaging Details

Code Available Quantity Product Name Item Weight Pieces in a Pack Carton Weight Carton Size
350 33858 A4 MagicTrans-Jet Light Papers 0.082 1000 8.2 kg 30x22x24 cm
349 On Demand A3 MagicTrans-Jet Light Papers 0.016 500 8.2 kg 44x32x12 cm
350-P On Demand Premium A4 MagicTrans-Jet Light Papers 0.010 3000 31.5 kg 55x41x36 cm

 

 

Technical Specifications

Instructions

Printing Procedure

Jet Light Paper is a compatible printing medium for any Inkjet Printer machine. However to reach maximum potential of this printing and transfer paper it is suggested to use original Ink Jet Printers with original inks on it. Set the standard in “Normal” printing and adjust the quality option to “Photo Quality” to get better results. Never forget that Transfer method always needs the print to b transferred facing the medium, so set the design pattern to Print Mirror Image before printing it on the paper.

Transfer Procedure

Press the transfer paper for 5 seconds with heat set on a lower temperature under the Heat Transfer Machine and check if the print is perfectly dry. If needed, trim down the design and remove the non printed films. Now, remove the back paper and place the printed film directly to the desire location in the medium. Next, place the included release paper on top of the design and press the transfer paper on the medium with the standard heat and pressure settings. When transferring is done, peel the paper starting in one corner gently. Use caution while paper is still hot.

Suggested Settings for light mediums would be:

  • Temperature : 350 Fahrenheit  or 175 Celsius
  • Time: 10 Seconds
  • Pressure: Approximately 40 lbs

Washing and Ironing Instructions

Wash inside out to avoid scratching and damaging the design print. Use cold water only in washing the output product. DO NOT use bleach or any kind in washing the medium. Place into the dryer immediately after washing and avoid hanging it to dry. When ironing the design medium, avoid heating the areas with printed images on it.

General Instructions

Best result is obtained on cotton, polyester, poly/cotton or 50:50 Blends for fabrics. It is highly recommended to test print also and wash test one output before producing mass orders to ensure that the ink used is compatible with the medium used.

Keep transfer papers in the plastic bag to avoid from getting moist on the paper until actual use. Check if the container is closed after each use.

 

Related

Silicone Sheets FS-03
Silicone Sheets FS-02
MagicTrans CLC Light Heat Transfer Papers
MagicTrans CLP Light Transfer Papers
MagicTrans Jet Dark Transfer Papers
MagicTrans CLP Dark Transfer Papers
ChromaBlast Transfer Papers
New Laser Transfer Papers
Heat Transfer Papers LLX
Forever Laser Light Papers 353
Free Style Dark Transfer Papers FS-01